After CL 398014 fixed a compiler deadlock on syntax errors,
this CL adds a test case and more details for that.
How it was fixed:
CL 57751 introduced a channel "sem" to limit the number of
simultaneously open files.
Unfortunately, when the number of syntax processing goroutines
exceeds this limit, will easily trigger deadlock.
In the original implementation, "sem" only limited the number
of open files, not the number of concurrent goroutines, which
will cause extra goroutines to block on "sem". When the p.err
of the following iteration happens to be held by the blocking
goroutine, it will fall into a circular wait, which is a deadlock.
CL 398014 fixed the above deadlock, also see issue #52127.
First, move "sem <- struct{}{}" to the outside of the syntax
processing goroutine, so that the number of concurrent goroutines
does not exceed the number of open files, to ensure that all
goroutines in execution can eventually write to p.err.
Second, move the entire syntax processing logic into a separate
goroutine to avoid blocking on the producer side.
Change-Id: I1bb89bfee3d2703784f0c0d4ded82baab2ae867a
Reviewed-on: https://go-review.googlesource.com/c/go/+/399054
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Now that gofmt is reformatting these, we can't get away with
not knowing about directives such as //export and //extern (for gccgo).
Otherwise "//export foo" and "//extern foo" turn into "// export foo",
and "// extern foo", which are completely different meanings.
For #51082.
Change-Id: Id0970331fa0b52ab5fa621631b5fa460767068bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/399734
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
[This CL is part of a sequence implementing the proposal #51082.
The design doc is at https://go.dev/s/godocfmt-design.]
Use go/doc/comment to reformat doc comments into a
standard form, enabling future expansion later and generally
making it easier to edit and read doc comments.
For #51082.
Change-Id: I6ab3b80846f03d781951111e4c36f86f47d21bb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/384264
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
[This CL is part of a sequence implementing the proposal #51082.
The design doc is at https://go.dev/s/godocfmt-design.]
Implement wrapping of text output, for the “go doc” command.
The algorithm is from D. S. Hirschberg and L. L. Larmore,
“The least weight subsequence problem,” FOCS 1985, pp. 137-143.
For #51082.
Change-Id: I07787be3b4f1716b8ed9de9959f94ecbc596cc43
Reviewed-on: https://go-review.googlesource.com/c/go/+/397283
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Jonathan Amsterdam <jba@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
[This CL is part of a sequence implementing the proposal #51082.
The design doc is at https://go.dev/s/godocfmt-design.]
Implement just the data structures of the new API for
parsing and printing doc comments, as well as a syntax tree
form for inspecting and manipulating them.
The API itself was discussed and accepted as part of the
proposal process in #51082.
For #51082.
Change-Id: Iae7fbc85705964585273b970c5c62e394feb1288
Reviewed-on: https://go-review.googlesource.com/c/go/+/397276
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Jonathan Amsterdam <jba@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The zip reader checks that the uncompressed file size is valid
after all compressed files read until EOF.
However in between reading each file, there could have already
been an overflow where nread > UncompressedSize64 hence this
change will now return ErrFormat in such situations.
Fixes#49791
Change-Id: If3584a57d173de6a97bf35c07d2a99ff6972f820
Reviewed-on: https://go-review.googlesource.com/c/go/+/366854
Trust: mzh <mzh@golangcn.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
For various reasons Intel has suspended viewing web pages in the .ru
domain, so change the domain of the documents cited in the code
to the .com domain. In addition, the chapter numbers in the document
were updated and fix it.
Change-Id: I718be1548ec46f05ebc4f73873d4635c1d5fc76d
Reviewed-on: https://go-review.googlesource.com/c/go/+/399060
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Auto-Submit: Emmanuel Odeke <emmanuel@orijtech.com>
It is not necessary to expand the key twice for each direction,
the decrypt key can be stored in reverse simultaneously.
Likewise, there is no need to store the key length alongside the
expanded keys, this is now inferred by the key length slice.
Noteably, the key expansion benchmark assumes the key array size
is the exact size of the expanded key.
Now, the ppc64le aes asm interface is identical to the generic
asm interface. Callsites and usage is updated to reflect this.
Performance uplift on POWER9 is substantial:
name old time/op new time/op delta
Expand 167ns ± 0% 49ns ± 0% -70.55%
Change-Id: I3fdaf9c27e8860e8150d4683eb4046d97a53293a
Reviewed-on: https://go-review.googlesource.com/c/go/+/398894
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Trust: Paul Murphy <murp@ibm.com>
Call initCommonHeader in canonicalMIMEHeaderKey to ensure that
commonHeader is initialized before use. Remove all other calls to
initCommonHeader, since commonHeader is only used in
canonicalMIMEHeaderKey.
This prevents a race condition: read of commonHeader before
commonHeader has been initialized.
Add regression test that triggers the race condition which can be
detected by the race detector.
Fixes#46363
Change-Id: I00c8c52c6f4c78c0305978c876142c1b388174af
Reviewed-on: https://go-review.googlesource.com/c/go/+/397575
Trust: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
After CL 379474 has landed, the only remaining cgo export header
incompatibility with MSVC is the use of the _Complex macro,
which is not supported in MSVC even when it is part of the ISO C99
standard (1).
Since MSVC 2015 (2), complex math are supported via _Fcomplex and
_Dcomplex, which are equivalent to float _Complex and double _Complex.
As MSVC and C complex types have the same memory layout, we should
be able to typedef GoComplex64 and GoComplex128 to the appropriate
type in MSVC.
It is important to note that this CL is not adding MSVC support to cgo.
C compilers should still be GCC-compatible.
This CL is about allowing to include, without further modifications,
a DLL export header generated by cgo, normally using Mingw-W64 compiler,
into a MSVC project. This was already possible if the export header
changes introduced in this CL were done outside cgo, either manually or
in a post-build script.
Fixes#36233
1: https://docs.microsoft.com/en-us/cpp/c-runtime-library/complex-math-support
2: https://docs.microsoft.com/en-us/cpp/overview/visual-cpp-language-conformance?c-standard-library-features-1
Change-Id: Iad8f26984b115c728e3b73f3a8334ade7a11cfa1
Reviewed-on: https://go-review.googlesource.com/c/go/+/397134
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
It has been agreed that we should prefer the US spelling of words like
"canceling" over "cancelling"; for example, see https://go.dev/cl/14526.
Fix a few occurrences of the "canceling" inconsistency, as well as:
* signaling
* tunneling
* marshaling
Change-Id: I99f3ba0a700a9f0292bc6c1b110af31dd05f1ff0
Reviewed-on: https://go-review.googlesource.com/c/go/+/398734
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The ported cryptogam implementation uses a subtle and tricky mechanism
using lxv/vperm/lvsl to load unaligned vectors. This is difficult to
read, and may read and write unrelated bytes if reading from an
unaligned address.
Instead, POWER8 instructions can be used to load from unaligned memory
with much less overhead. Alignment interrupts only occur when reading
or writing cache-inhibited memory, which we assume isn't used in go
today, otherwise alignment penalties are usually marginal.
Instead lxvd2x+xxpermdi and xxpermdi+stxvd2x can be used to emulate
unaligned LE bytewise loads, similar to lxv/stxv on POWER9 in
little-endian mode.
Likewise, a custom permute vector is used to emulate BE bytewise
storage operations, lxvb16x/stxvb16x, on POWER9.
This greatly simplifies the code, and it makes it much easier to store
the keys in reverse (which is exactly how the decrypt keys are expected
to be stored).
Change-Id: I2334337e31a8fdf8d13ba96231142a039f237098
Reviewed-on: https://go-review.googlesource.com/c/go/+/395494
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Trust: Paul Murphy <murp@ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
With this change, the shift checking code matches the corresponding
go/types code, but for the differences in the internal error reporting,
and call of check.overflow.
The change leads to the recording of an untyped int value if the RHS
of a non-constant shift is an untyped integer value. Adjust the type
in the compiler's irgen accordingly. Add test/shift3.go to verify
behavior.
Change-Id: I20386fcb1d5c48becffdc2203081fb70c08b282d
Reviewed-on: https://go-review.googlesource.com/c/go/+/398236
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This reverts a behavior change introduced in Go 1.18 (commit 9f69a443;
CL 340049). In Go 1.17 and earlier, draw.Draw(etc, draw.Src) with
image.NRGBA dst and src images would pass through a (heap allocated)
color.Color interface value holding a color.NRGBA concrete value.
Threading that color.NRGBA value all the way through preserves
non-premultiplied alpha transparency information (distinguishing e.g.
transparent blue from transparent red).
CL 340049 optimized out that heap allocation (per pixel), calling new
SetRGBA64At and RGBA64At methods instead. However, these methods (like
the existing image/color Color.RGBA method) work in premultiplied alpha,
so any distinction between transparent colors is lost.
This commit re-introduces the preservation of distinct transparencies,
when dst and src are both *image.NRGBA (or both *image.NRGBA64) and the
op is draw.Src.
Fixes#51893
Change-Id: Id9c64bfeeaecc458586f169f50b99d6c8aa52a7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/396795
Trust: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
In fields that start with the same character as the right delimiter, the
whole delimiter needs to be checked. The first character alone is not
sufficient.
Fixes#52165
Change-Id: I1e4086048417693757f34d0e9ff3bf86aba0d35c
Reviewed-on: https://go-review.googlesource.com/c/go/+/398475
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
The source of these errors is undiagnosed, but they have only been
observed on netbsd builders (on a variety of architectures).
Tested manually by injecting this code into the test's handler:
if mrand.Intn(4) == 0 {
if conn, _, err := w.(Hijacker).Hijack(); err == nil {
conn.(*net.TCPConn).SetLinger(0)
conn.Close()
return
}
}
and temporarily disabling the 'runtime.GOOS' part of the condition.
For #52168.
Change-Id: I10965803e5a0d493ac4a000575de8b5f0266989c
Reviewed-on: https://go-review.googlesource.com/c/go/+/398635
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds a new, cryptobyte based, CRL parser, which returns a
x509.RevocaitonList, rather than a pkix.CertificateList. This allows us
to return much more detailed information, as well as leaving open the
option of adding further information since RevocationList is not a
direct ASN.1 representation like pkix.CertificateList. Additionally
a new method is added to RevocationList, CheckSignatureFrom, which is
analogous to the method with the same name on Certificate, which
properly checks that the signature is from an issuing certiifcate.
This change also deprecates a number of older CRL related functions and
types, which have been replaced with the new functionality introduced
in this change:
* crypto/x509.ParseCRL
* crypto/x509.ParseDERCRL
* crypto/x509.CheckCRLSignature
* crypto/x509/pkix.CertificateList
* crypto/x509/pkix.TBSCertificateList
Fixes#50674
Change-Id: I27dc219e39bef09a396e666b4fccaa32578fd913
Reviewed-on: https://go-review.googlesource.com/c/go/+/390834
Reviewed-by: Damien Neil <dneil@google.com>
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Roland Shoemaker <roland@golang.org>
Auto-Submit: Roland Shoemaker <roland@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
'go tool dist env' outputs different (and fewer) environment variables
than 'go env'. The 'go tool dist env' variables should be
authoritative, whereas many printed by 'go env' are merely
informational (and not intended to be overridden in the actual
environment).
Fixes#52009
Change-Id: Ic0590153875183135cebf7ca55ead7c2b4038569
Reviewed-on: https://go-review.googlesource.com/c/go/+/398061
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
cmd/internal/moddeps is currently failing on the longtest builders
because vendored third-party dependencies were accidentally edited as
part of CL 384262 (a global cleanup of the standard library).
Updates #51082
Change-Id: I6f79c8f1177420a51128ce42d6c14fa5dcc4bd7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/398455
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For very small inputs, h.Reset+h.Write+h.Sum64 is fundamentally
slower than a single operation, by about a factor of two, because
Write must copy the data into h's buffer, just in case there is another
Write before the Sum64.
A single function doing the whole sequence knows there is no extra
write that will happen, so it doesn't need the buffer, so it avoids the copy.
Fixes#42710.
Change-Id: Icc79c68ccb10827f6640071d026df86b4940fcc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/392494
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
